|
 |
| |
| ROTARY
BIN LEVEL INDICATOR |
| Rotary
Bin Level Indicators are used to communicate bulk product bin levels
to control equipment. |
| |
| The
GRDX rotary paddles can be easily mounted on the top or side of a
bin, surge tank or silo and provide reliable point level detection
for a variety of bulk solids. |
 |
| |
| GRDX:
NTRL/C explosion proof rating for Class I, Groups C & D, and Class
II, Groups E, F, & G. |
| |
| FEATURES |
 |
General
purpose and explosion proof |
| |
models |
|
Simple
rugged construction and |
| |
reliable
operation |
|
Fail-safe
switching to protect production process during power failures |
|
De-energizing
motor extends motor life “Three bearings” provide greater
shaft |
| |
support
and dependability |
| |
|
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
 |
| |
| |
| |
| |
 |
| |
| |
| |
| |
| |
| |
SIDE
MOUNT INSTRUCTIONS |
|
|
| |
|
| |
1.
Locate and cut hole into side of bin to fit outside diameter of 1 1/4”
pipe coupling. |
| |
2.
Weld one half of standard 1 1/4” pipe coupling to bin wall flush with
inside of bin. |
| |
3.
Insert hub into coupling and turn to desired conduit position. |
| |
4.
Screw paddle into place and replace lock pin. |
| |
5.
Shaft and paddle should be shielded in low level mounting when subjected
to material flow. |
| |
6.
For side mounting, the GRSS-1 solid coupler is recommended |
| |
|
| |
ROTARY
BIN LEVEL INDICATOR SPECIFICATIONS |
| |
 |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
Rotary
Bin Level Indicator connected to a warning light. |
|
Fail-safe
relay output provides instantaneous corrective response in the event of
a power failure. |
|
| |
|
|
|
| |
|
| |
TOP
MOUNT |
| |
|
| |
 |
|
|
| |
|
|
| |
|
TOP
MOUNT INSTRUCTIONS |
| |
|
|
| |
|
1.
Locate and cut hole in top of bin to fit outside diameter of 1 1/4” |
| |
|
 pipe coupling (1.950”). |
| |
|
2.
Position coupling halfway into bin and weld. |
| |
|
3.
Turn hub of unit until conduit opening is in desired location. |
| |
|
4.
Add 1/4” extension pipe to desired length with standard 1/4” |
| |
|
coupling
on bottom end. |
| |
|
5.
Cut 1 1/4” support pipe approximately 4” longer than overall |
| |
|
length
1/4” pipe shaft when used with GRFC-1 flexible coupling. |
| |
|
6.
Insert 1 1/4” pipe into coupling and tighten. |
| |
|
7.
Insert paddle into 1/4” coupling and drill holes for lock pin. |
| |
|
|
| |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| |
CUSTOM
SOLUTIONS TO FIT YOUR NEEDS |
|
| |
    |
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rotary
Bin Level Indicator - Mixing and Blending Equipment |
| |
©Vortex Ventures Inc. 2003 - All Rights Reserved |
| |
Mountain
Eagle Web Consulting & Design |
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
